GE Universal Remote Codes For Samsung TV & Programming

GE universal remote codes for Samsung TV

When it talks about the universal remote for a Samsung TV, the GE remote is the first comes in my mind because of too many reasons. They are easy to pair with the TV, budget-friendly, multiple device compatibility, easiness in finding the pairing codes, etc.

That’s why I recommend you to have a ByJasco GE remote when you lost the original Samsung TV remote control. Since the cost of the remote is very low, you can buy it as a spare.

Today, we’ll talk about the GE universal remote codes for Samsung TV and the programming instructions. All of the CL3 – CL6 versions codes are listed in this post. I hope you are using any one of the CL5 or CL6 version because they are the latest launched models.

Fortunately, the pairing procedure is same for all the models remotes.

What are the 4-Digit GE universal remote codes for Samsung TV?

  • 5791
  • 5801
  • 3301
  • 3301
  • 5471
  • 5521
  • 2741
  • 2961
  • 3321
  • 0001
  • 0101
  • 0251
  • 0261
  • 0331
  • 0351
  • 0531
  • 0571
  • 0711
  • 0781
  • 1191

The listed codes are tested and working fine. And it is given in the order of success ratio. So, try to use the first code when you enter into the setup stage.

Without any further delay, let’s move into the next step.

How to program GE universal remote to Samsung TV?

  • Turn on your TV
  • Press and hold the Setup button on the remote until the RED LED turns ON
  • Then press on the TV button
  • Enter the first 4-Digit code
  • The RED light get turned OFF
  • Point the remote to TV, and test all the buttons
  • If working porperly, you have setup the remote to the TV
  • If not, try program with another code

Because of having the codes in our side, this is the best method to program the remote work with your Samsung TV. I already listed the code, or you may have the code booklet that comes along with the remote control when you bought it.

So, what to do when you don’t know the code or non of the code doesn’t work.

Use the following auto-code search model.

Program GE remote to Samsung TV without code

In this method, the remote control will automatically search the apt code from their code library and sync with your Samsung smart TV.

program GE remote to Samsung TV

  • Turn on your TV
  • Press and hold down the Setup/Search button until the RED light lit
  • Then press the TV button, the LED light blink and remains lit
  • Point the remote to your TV
  • Press and release the power button on every 5 seconds until your TV turns OFF
  • Manually turn on the TV
  • Press the Volume UP key on every 3 seconds until TV turns Off
  • Now press the TV button on the remote to save the code

That’s it!

In this way you can program the remote to any branded TV if you don’t sure about the code.

If you are trying to program for other categories of devices lke DVD player, Set-top boxes, etc, use the respective device keys on the tops of the remote. It’s denoted as TV/DVD/CBL (Cable Box)/Set-top-box/AUD (audio device).

Fix GE universal remote control not working with Samsung TV

I recommend you to go to reset the remote and then re-program with any one of the above-mentioned methods.

How to factory reset?

Press and hold the setup button till the RED light blinks and turns ON. Then press the OK button and then the 0 (Zero) key so that the RED light blinks twice means that the remote has been reset.

Additionally, it’s beneficial if you perform power ecycling your remote.

Remove the batteries from the compartment for 2 minutes. Then insert back and re-program.

How to find the codes online?

It’s easy for you to find the 4-digit code online from the ByJasco official website. To get the exact code, you should know the code list version of the remote. Get it note from the battery compartment. remove the batteries, and then see to check the remote belongs to CL3, CL4, CL5, or CL6.

After that, go to the official website to find the code. The example link is,

https://byjasco.com/support/resource-library/ge-universal-remote-codes/cl5

If you are using the CL5 model.

search for GE universal remote codes for Samsung TV online

replace the CL5 portion according to the model number you have.

Two drop-down menu there. One is to select the TV brand and other is to select the device category.

Select TV from the first one, and Samsung from the second one.

BOOM!

The codes are ready. Note it. and program it. Enjoy!

Conclusion

Hope this helps you to pair the General Electric third-party universal remote to your Samsung TV. Follow the exact strategy that I used here to avoid any issue. And if you are still getting any error, I am here to help you, just leave a comment in the comment box below.

FAQ

Will GE universal remote work with Samsung TV?

Yes! It works with almost all the model TVs. You should program with a specific device code. Your TV should have an IR sensor since the remote works based on Infrared signals.

Can I program a GE remote without code?

Yes! Use the automatic code search method. In this method, the remote itself finds the more appropriate codes for your TV and automatically sync.

You may Like to read:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *